Powermax Alarms

Powerlink Modules

Visonic are keen to promote the Powerlink modules which are used to connect the Powermax alarm to cameras for viewing over the internet.  However, because of the networking skills required, Visonic will not provide any technical support, and we can only give limited support.

We have also provided access to the Installation and user manual.  We have also written a short guide about installing the Powerlink module.

The Powerlink module is essentially a webserver with an IP address and is normally connected to a network through a router.  Customers who are familiar with computer networking will have no problem installing the module.

While the Powerlink seems a useful solution, it is relatively expensive and somewhat limited.  A far better solution is to utilise a proper CCTV system based around a fully featured DVR (Digital Video Recorder).  Most DVRs have the Linux operating system installed which means that they will easily connect to a computer either locally or over the internet.

 


HomeHome

Cart  

(empty)

New products

No new product at this time

Top sellers

  • Remote Keyfob MCT-234 (868MHz)
  • Next K9-85 (Pet Tolerant) MCW DD PIR (868MHz)
Remote Keyfob MCT-234 (868MHz)
The MCT-234 is a 4-button miniature wireless...
Next K9-85 (Pet Tolerant) MCW DD PIR (868MHz)
The Next K9-85 PIR MCW PowerCode™...
Powermax MCT302 Magnetic Door Contact (868MHz)
The MCT-302T is a fully supervised...
(UK Mainland Ship only) 3.6v 19000mAh Non-Rechargeable battery for MCS710/720/730 Sounder
( NB: Mainland UK Courier Shipping Only ) This...
Powermax Next MCW DD PIR (868MHz)
The Next PIR MCW PowerCode™ wireless...

All best sellers